Name: MQG4043S Portal dönər kran
Brand: SANY
SKU: MQG4043S

MQG4043S Portal dönər kran

SANY MQG4043S Portal dönər kran — Gantry Speed 26m/min · Hoisting Height Under Hook 30m · Hoisting Speed 30m/min. Azərbaycanda rəsmi satış və servis.

Qiymət al Servis

Texniki məlumat

MQG4043S

Gantry Speed

26m/min

Hoisting Height Under Hook

30m

Hoisting Speed

30m/min

Luffing Speed

50m/min

Radius

12-43m

Rail Span

12m

Rated Hoisting Capacity

40T

Slewing Diameter

≤9m

Slewing Speed

0.8/1.0m/min

Wheel Base

12m

Wheel Load

350KN

Məhsul haqqında

MQG4043S Portal dönər kran

SANY MQG4043S Portal dönər kran seriyasına aiddir. Əsas göstəricilər: Gantry Speed 26m/min · Hoisting Height Under Hook 30m · Hoisting Speed 30m/min.

SANY Azerbaijan bu model üzrə məsləhət, çatdırılma dəstəyi, orijinal ehtiyat hissələri və satışdan sonrakı servis təqdim edir.

Intelligent and Efficient — Fully automatic tracking for spreader slewing The slewing angle of the crane and position of the slewing motor is sent to the spreader by real-time cont...
Stable — The hoisting wire rope is fully wound The lifting force is arranged at the back of the frame, and the hoisting wire rope is set with full winding. The Angle of the wire ro...
Modularization — Modular design Customers choose modular configurations according to their needs, speed, and convenience. At the same time, the degree of universality is high, whic...
Safe and Reliable — Over hoisting prevention for hook When the hook reaches its maximum height, control relays activate the buzzer alarm. Ascending motion stops and only descending...
Energy-saving and Environmentally-friendly — Energy recycling technology Active inverter technology is applied to transfer the stored dynamic power and potential power into electri...

Üstünlüklər

Intelligent and Efficient — Fully automatic tracking for spreader slewing The slewing angle of the crane and position of the slewing motor is sent to the spreader by real-time control and intelligent compensation algorithm. The spreader will move in the same angle speed in opposite to counteract the angle of crane slewing. Grab track recording Data of the grab in one or more cycles (wire rope lowering distance, slewing angle, luffing angle, wire rope lowering distance, accelerating and decreasing time) are optimized based on the recorded data for the grab to repeat the movement automatically.
Stable — The hoisting wire rope is fully wound The lifting force is arranged at the back of the frame, and the hoisting wire rope is set with full winding. The Angle of the wire rope is less than 2.5°, and the drawing life of the wire rope is increased by 5%-10%.
Modularization — Modular design Customers choose modular configurations according to their needs, speed, and convenience. At the same time, the degree of universality is high, which can realize spare parts sharing between customers and factories, customers and customers, and reduce customer spare parts inventory.
Safe and Reliable — Over hoisting prevention for hook When the hook reaches its maximum height, control relays activate the buzzer alarm. Ascending motion stops and only descending is allowed. This device protects the lifting mechanism effectively, ensuring high efficiency safe protection. Speed protection for hoisting mechanism Acceleration of hoisting points is calculated and sub protection is set for the crane to predict overspeed and avoid the obvious crush. Hardware over speed switch is applied for double protection.
Energy-saving and Environmentally-friendly — Energy recycling technology Active inverter technology is applied to transfer the stored dynamic power and potential power into electricity which is recycled to the grid. Moreover, it can resist the pollution to the grid from higher harmonic voltage, thus increasing the power factor of the equipment. Intelligent low-voltage capacitor compensation A fully automatic resonance eliminating reactive power compensation device is configured to achieve an average power factor above 0.9 or more, which improves electricity efficiency and reduces wire consumption.

Bu model üçün təklif alın

Konfiqurasiya, servis paketi və təhvil şərtləri üzrə dəqiq məlumat üçün sorğu göndərin.

Qiymət al

Oxşar məhsullar

Portal dönər kran →

MQG1630S

Gantry Speed: 26m/min
Hoisting Height Under Hook: 25m

MQG1633S

Gantry Speed: 26m/min
Hoisting Height Under Hook: 30m

MQG2535S

Gantry Speed: 26m/min
Hoisting Height Under Hook: 30m

MQG4030S

Gantry Speed: 26m/min
Hoisting Height Under Hook: 30m